Glimåkra Stainless Steel Reeds for Floor Looms
Reduced to clear - £10 off each reed while stocks last. Only 70cm length reeds left
These stainless steel reeds are produced by Glimåkra in Oxberg, Sweden. The reeds supplied for floor looms greater than 70cm wide are 12cm (5in) high in order to provide a larger shed. Reeds are measured in dents per 10cm - please note approximate conversion to dents per inch (dpi). Use the drop down menu to select for loom width (cm) and reed size.
These reeds are of a good basic construction. We recommend that reeds are cleaned prior to use to remove any oil or other residue from the manufacturing process.
Please check your loom width and allow for the end caps on the ends of the reeds - there is approximately a further 3cm length to these reeds over and above the stated weaving width.