Louët Erica 2 Shaft Table Loom

If price in GBP UK VAT is included. If price in other currency price is ex UK VAT

Louët Erica 2 Shaft Table Loom

Free UK delivery

The Erica is the compact table loom from Louët, providing a great entry level loom to multi-shaft weaving at a price that compares with a good quality rigid heddle loom.

The Erica is available in a 30 cm (11 ¾“) or 50cm (20") weaving width and is an attractive alternative to a rigid heddle loom: easy to operate, with a more even warp tension and a large shed of 4.5 cm (1 ¾”) plus you will have flexibility in the number of threads per cm. This is the basic 2 shaft version of the Erica but there is also the option for 4 shafts available, or alternatively to expand the 2 shaft loom later on to 3 or 4 shafts by using the one shaft extension kits.

The loom is made of unlacquered beech and laminated birch. The Erica is supplied with:

  • built-in raddle
  • stainless steel reed (40/10 - 10dpi)
  • two hundred 150mm Texsolv heddles
  • stainless steel lease- and tie-up sticks and warp sticks

All Erica looms are supplied with 200 150mm heddles as standard - if you require more heddles for the 4 shaft or 50cm versions then these can be found here.

Please note that Louët looms are not supplied with a shuttle, threading hook or other warping tools.

Louët have also put together a Table Loom Accessory Pack of useful tools that will help those new to table loom weaving have everything they need to get going with their loom.

The Erica is supplied as a flat-pack kit which requires assembly, with full instructions included. 

By supplying as a flat-pack and with a natural unlacquered finish is one of the main reasons that Louet have been able to keep the cost low for a multi-shaft loom. As the wood used is unfinished you may need to sand back to remove rough edges and splinters and then wax or lacquer to finish if you wish. At Weft Blown we think that it is a fairly straightforward build but would advise that you set aside around half a day to complete the construction and possibly a bit longer if you are less confident at assembling from a kit. We are always here to help too if you have any questions when you are building your loom.

If you are new to multi-shaft weaving we would recommend investing in a good instructional book.

Basic written instructions for warping and weaving on the Erica can be found here.

An optional floor stand for both sizes of the Erica is also available plus separate one shaft extension packs to expand the 2 shaft version to 3 or 4 shafts. A carry bag is also now available.

All accessories for the Erica table loom can be found here.

How to assemble the Erica Loom:

 How to Warp and Weave: